Installation Guide
Product Construction - Towel Warmer
The towel warmer is constructed from 304 stainless steel with
a wall thickness of between 0.8 mm and 1.2 mm. The towel
warmer is heated by a UL listed wire. The mounting brackets are
manufactured from stainless steel and nished to match the nish
of the specic model.
Connection Method
The heating wire is connected to a non-heated lead by a mechanical
crimp connection, sealed with a heat shrink tube. Electricity is fed
into the Towel Warmer via a Power Leg. Power can then be fed to
the control unit which may be located anywhere in the room.
Safety Ratings
The main electrical line feeding the Towel Warmer must per local
and national codes and incorporate an Appliance Leakage Current
Interrupter (ALCI) for North America, or GFCI.
14