Installation Guide
OPERATION
Manual
Use the ON/OFF switch located on the bottom right side (when facing the
towel warmer) to control when you want the unit to warm. Refer to Diagram
D for switch for location.
With a Control
You may want to pair your towel warmer with a compatible WarmlyYours timer
or switch. Make sure to refer to the installation manual of the control for proper
operation and installation. If you have any questions, call 800-875-5285.
Your WarmlyYours Towel Warmer is designed to gradually warm towels and
works best when towels are left to hang for at least 1 hour.
For optimum operation of your new towel warmer, we recommend placing
no more than two (2) towels at a time on the warmer. Place the towels in a
way to maximize the contact area between the towel and the towel warmer.
The towel will be its warmest when it is placed over the top bar. This allows a
greater portion of the towel to make the most contact with the warmer.
5. SPECIFICATIONS
Model Name Dimensions
Voltage
(Volts)
Heat
Output
(Watts)
Resistance
(ohms)
Amperage
(amps)
TW-F10BS-HP
Innity -
Brushed
24”w (600mm) x 32”h (790mm)
x 6”d (120mm)
120 150 96 1.25
13