Operating instructions
Your WarmlyYours Towel Warmer is designed to warm towels, it is not
recommended for any other use.
Plug-In Model
With your Innity Plug-In model secured to the wall and plugged into a
grounded outlet, you are now ready to enjoy your Towel Warmer. Use the ON/
OFF switch located on the bottom left-side (when facing the Towel Warmer)
to control when you want the unit to warm. Refer to Diagram D for switch for
location.
Hardwired Model
WarmlyYours Towel Warmers include our programmable timer for
luxurious and economical use of the Towel Warmer.
On
Towel Warmer runs at 100% power and will reach temperatures
between 100° F and 140° F depending on the following: running
time, number of towels, type of towels and ambient room
temperature. For optimal use we recommend Automatic Mode.
Automatic Mode
Programmable Timer allows up to 14 events or Two ON-OFF
cycles per day. Easy programming allows you to set intervals
of operation for each day of the week. To access programming
controls ip the switch panel up. Reference Diagram G for
switch location.
Manual Mode
Timer can be set to operate in manual mode to function as a
simple ON-OFF switch.
For optimum operation of your new towel warmer, we recommend placing
no more than two (2) towels at a time on the warmer. Place the towels in a
way to maximize the contact area between the towel and the towel warmer.
The towel will be its warmest when it is placed over the top bar. This allows
a greater portion of the towel to make the most contact with the warmer.
We also suggest not operating the warmer for extended periods of time.
Most customers nd that setting the timer to operate the warmer 30 minutes
before and 30 minutes after the towel’s use is sufcient. Your results may vary
depending on the materials and construction of your towels.