Full Product Manual

18 PROGRESS PROFILES - PRODESO HEAT SYSTEM
Warranty
RESTRICTIONS FOR APPROVED HEATING CABLES:
ALL approved Heating Cables MUST be installed as per cable manufacturer instructions non in
with the latest version of the PRODESO HEAT SYSTEM HANDBOOK. Compliance
with following standards is mandatory CANADA: CAN/CSA-C22.2 No. 130-03 USA UL 1673 and ANSI/IEEE 515.1-2005
Thermostats must be compliant with following standards CANADA: C22.2 No. 24-93 USA UL 873
Use 2 ½” or 3 ¾” wire spacing. Do NOT exceed under any circumstances 12watt/square foot. INDOOR APPLICATIONS ONLY
Progress PRODESO HEAT MEMBRANE 10 Year Limited Warranty. WARRANTY FOR PRODESO HEAT MEMBRANE INSTALLED WITH APPROVED HEATING CABLES ( NON PRODESO
HEAT CABLE ).
In case a owner/installer decides to install PRODESO HEAT MEMBRANE with an heating cable other that PRODESO HEAT CABLE, Progress LIMITED WARRANTY for the
PRODESO HEAT SYSTEM above will apply only to the PRODESO HEAT MEMBRANE properties and performance of, UNCOUPLING, VAPOR MANAGEMENT, WATERPROOFING and LOAD
DISTRIBUTION. At NO time and under NO circumstances Progress
will be liable or responsible for any failures caused by the electrical heat cable itself or any components sold
by another manufacturer other than Progress
All North America Claims shall be sent to:
Progress America Inc.
Attention: Warranty Claim Department
4 Middlebury Boulevard (Unit 14)
Randolph, New Jersey 07869
U.S.A
*For the purpose of this warranty shall provide the warranty for the Product for end users located in the United States and in Canada. This warranty
is limited to sales and use of the Product in the United States and Canada.
ODESO HEAT MEMBRANE, PRODESO HEAT CABLE, PRODESO HEAT
THERMOSTAT KIT.