Full Product Manual

Installation and Operation
SECTION 5
9
5.1 Recommended Equipment and Items for Installation
The following equipment and items are recommended for installation of the WarmlyYours TempZone™
Floor Heating Cable :
• Ohmmeter (or multimeter)
• Circuit Check™
• Hot glue gun (if using hot glue to secure the Cable Fixing Strips)
• Industrial-grade hot glue (if using hot glue to secure the Cable Fixing Strips)
• Chisel or router to create a groove for the splice in the subfloor
• Hammer
• Screwdriver
• Protective wall plate
• Duct tape or high temperature tape
• Staples, nails, adhesive or 1⁄2 inch screws to attach the Cable Fixing Strips to the subfloor
• Class-A Ground Fault Circuit Interrupter (if not using a WarmlyYours thermostat)
• Single-gang electrical box for each thermostat or power module
• Listed electrical conduit (to be provided by installer)
• Permanent marker
• Tape measure
• Utility scissors
Hot glue gun
SmartPlan™
Tape
Tape measure
Ohmmeter
Electrical box
Circuit Check™
Screwdriver
Utility knife
Marker
Scissors
Hammer