Installation Guide

17 PROGRESS PROFILES - PRODESO HEAT SYSTEM
Products
ROLLS IN HDPE E PP
PROBAND 150/250
PREFORMED CORNERS
Rolls in HDPE and PP – thickness 0,4 mm - 1/64” in
PROBAND 150/250
Article Roll width H mm x L LM H in. x L ft. Rolls/Pack
PRBPE 1505 150 x 5 6” x 16’ 5” 10
PRBPE 1530 150 x 30 6” x 98’ 5” 6
PRBPE 2505 250 x 5 10” x 16’ 5” 5
PRBPE 2530 250 x 30 10” x 98’ 5” 3
Preformed corners in HDPE and PP thickness 0,40 mm
PREFORMED CORNERS
Article H x L mm H x L in. Pcs/Pack
PRBI (internal) 150 X 150 6” x 6” 10
PRBE (external) 150 X 150 6” x 6” 10
INTERNAL CORNER
EXTERNAL CORNER
PROBAND 150/250 is a waterproof polyethylene tape with a non woven
fleece sheet on both sides, which ensures adhesion.
AREA OF USE
• Use
Construction of perimeter joints and between adjacent sheets of
PRODESO HEAT SYSTEM.
• Don’t use
On bituminous coverings, for waterproofing walking and exposed
surfaces,on inverted roof insulation made of insulating panels or lightened
screeds. With adhesives containing solvents.
WARNING
Store in a cool and dry place avoiding direct sunlight and heat sources.
Read the technical details prior to application; in the case of special
applications, we recommend you consult our technical department.
Interior and exterior preformed polyethylene corners with a non woven
sheet on both sides, which ensures adhesion.
Interior and exterior preformed polyethylene corners with a non woven
sheet on both sides, which ensures adhesion.
AREA OF USE
• Use
Internal and external for
PRODESO HEAT SYSTEM.
• Don’t use
On bituminous coverings, for waterproofing walking and exposed
surfaces, on inverted roof insulation made of insulating panels or lightened
screeds. With adhesives containing solvents.
WARNING
Store in a cool and dry place avoiding direct sunlight and heat sources.
Read the technical details prior to application; in the case of special
applications, we recommend you consult our technical department.