Installation Guide

DELIVERY | PACKAGING
LAVA® 500W | 750W | 1000W
The LAVA® glass radiator has to be fi xed only with
the supplied mounting hardware. Screws and anchors
must correspond with the building material of the
wall (masonry, concrete, plasterboard, etc.). Drywall
anchors are included. The wall must have a fl at surface.
Wall mounting kit for
LAVA® 500W | 750W | 1000W:
• LAVA® Glass Radiator
• 1 x Wall mounting hardware:
A - 2 x mounting bracket
B - 4 x hex bolt M8 x 16
G - 8 x Anchors
After attaching hardware, do not tighten completely!
Only tighten hardware when unit is assured to mount by
test fi tting unit.
Electrical and electronic equipment frequently
contain valuable materials. They may also
contain harmful substances that were
necessary for their function and safety. The
residual waste or incorrect treatment can
harm the environment. Please help protect
our environment! Dispose your old unit
according to the local regulations.
ATTENTION: Packaging materials, must be disposed of
properly.
Ceiling kit for
LAVA® 500W | 750W | 1000W:
• LAVA® Glass Radiator
• 1 x Wall mounting hardware:
C- 4 x ceiling mounting bracket
D - 4 x screw M3 x 6
E - 4 x Lava Secure - Glass safety hook
F - 4 x hex bolt M8 x 20
(optional, might already be preinstalled on the device)
- 1 x wall protection plate
G - 8 x Anchors
After attaching hardware, do not tighten completely!
Only tighten hardware when unit is assured to mount by
test fi tting unit.

Installation and Usage Instruction | LAVA® Design Glass Radiator
Fig. 1 = Mounting Hardware
2
A
B
GG
DF
C
E