Full Product Manual

INSTALLATION INSTRUCTIONS
Step 2 - Cont.
Location where the lead wire leaves the Mirror Defoggers.
Prepare Electrical Rough-In and Wiring
Step 3
Using the location you determined in Step 2, install a 2” x 3”
remodeler’s electrical junction box inline with the Mirror Defogger’s
lead wires. Refer to Diagram C.
Note: The location where the wires leave must be entirely within the
area of the new electrical junction box.
Step 4
Run Romex cable from a nearby junction box to the new box.
Typically the most convenient junction box is the one that supplies
power to the lighting above the mirror. This will enable the system
to turn on automatically whenever the bathroom lights are turned
on.
Mirror
Wall
ClearlyYou™ Defogger
Existing
electrical box
for vanity
lighting
New single
gang electrical
box
QuickTime™ and a
TIFF (Uncompressed) decompressor
are needed to see this picture.
Mirror defogger
Remove Protective
Paper
Power Cord
Back of Mirror
Mirror Defogger
leads from Mirror Defogger
to light junction box
Model # Shape Width (Inches) Length (Inches) Watts Volts Amps MSRP
FFM-1218 Rectangle 12 18 29 120 0.24 $65.00
FFM-1824 Rectangle 18 24 57 120 0.48 $85.00
FFM-2432 Rectangle 24 32 96 120 0.80 $105.00
FFM-15R Round 15 20 120 0.17 $65.00
FFM-20R Round 20 41 120 0.34 $85.00
FFM-25R Round 25 65 120 0.54 $105.00
FFM-1826OV Oval 18 26 45 120 0.38 $85.00
FFM-2432OV Oval 24 32 76 120 0.63 $105.00
Circle
Circle
Circle
54
Diagram C
5.5”
14.75”
5.5”
5.75”
19.5
”
6
”
9.25
”
12
”
FFM-25R
FFM-20R
FFM-15R
FFM-1218
12.5”
10”
7.5”
6”
12.5”
10”
7.5”
6”