Specifications

Page 66
12.1.8 Manual Select
1. Press
SELECT to toggle through ON / AUTO / OFF modes as indicated by
the timer status.
2.
ON mode turns on the timer.
3.
OFF mode turns off the timer.
4.
AUTO mode runs the set programme.
12.1.9 Manual Select
This function is only applicable when your timer is set on
AUTO mode.
You can temporarily override the normal switching times by pressing the ADV key.
The temporarily override won’t affect the normal programme after execution of the
override.
1. Press CH ADV
or HW ADV key the CH icon or HW icon will flash.
2. In approximately 5 seconds the display CH select mode ‘AUTO’ or HW select
mode ‘AUTO’ will flash and go into the manual override function.
3. OFF mode turns off the timer.
4. To cancel override by pressing CH ADV
or HW ADV and the ‘AUTO’ will stop
flash.
12.1.10 Manual Hour
1. Press CH ADV
or HW ADV key, the CH icon will flash.
2. You now have approx 5 second to enter desired length of time by pressing
CH ADV
or HW ADV key once for each hour the new time set should be in
affect.
3. The MANUAL HOUR function will bring the unit ON 1 hour to 3 hours in the
OFF mode.
4. The MANUAL HOUR function will bring the unit OFF 1 hour to 3 hours in the
ON mode.
5. The MANUAL HOUR function is in operation, a count down clock will
appear. Then normal display and count down clock will appear on the LCD
alternately.
6. The MANUAL HOUR function will bring the unit ON 1 hour to 3 hours in off,
clock will count down immediately.
7. When MANUAL HOUR function will extend by 1 hour to 3 hours while ON,
clock will count down after the programmed ON is finished.
12.1.11 Cancel Manual Hour Function
Press CH ADV
or HW ADV button again the LCD display and switching status will
return to normal.