Installation Guide

17
buywarmall.com
The thermostat can now be connected by following the manufacturer’s instructions. lt
is recommended that a qualied professional exicutes the connection to ensure proper
operation of the system.
General Information
WarmAll recommends that you consult the ooring manufacturer for specications.
Preparation and installation of the ooring must be carried out according to the
manufacturer’s recommendations.
The system must not be switched on until
the cement / thinset is completely dry.
A minimum of 4 weeks is recommended.
Installation on BC-Fir (Fir tree) plywood
Cement installation
IMPORTANT
Perform the 3rd cable resistance & insulation test when the cables are covered with
fresh cement.
WarmAll recommends taking pictures all along or during
the installation.
Floor covering
Sensor
Self-leveling
Heating cable
BC-Fir; plywood
Floor covering
Sensor
Self-leveling
Heating cable
Isolation membrane (optional)