Installation Instructions

VERIFY SIZE OF HEATED AREA
z Conrmthecableselectedwillprovidethecorrectcoveragebymeasuringyourroomooranddeterminingthesquarefootagetobe
heated. This is your Heated Area.Areasundercabinetsorxtures(toilets,sinks,tubs,etc.)shouldNOTbeincluded(Figure 2). Heating
cables may be installed under tiled shower surfaces provided the cables are embedded in a cement-based underlayment and covered
by an approved water impermeable membrane. Consult your local electrical and/or building inspection authorities for more informa-
tion.
z Usingtheheatedarea,supplyvoltage(120Vor240V)andthechoiceofStandard or Alternating Heating Cable Spacing, verify that you
have the recommended cable set for your application using Figure 2 of the DFT Cable Guide.
Drywall, xtures and vanities removed for illustrative purposes.
2.1