PROFESSIONAL CORDLESS WINE OPENER WO50 For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: WARNING 1. Do not operate wine opener with a damaged cord or plug, after the appliance malfunctions or if it has been dropped or damaged in any manner. Return appliance to the nearest Authorized Service Center or phone Waring Customer Service at 800 492-7464 for examination, repair or electrical or mechanical adjustment. 2.
13. Use of attachments not recommended or sold by Waring may cause fire, electrical shock, injury or damage to the product. CAUTION: Corkscrew is sharp. Handle carefully. Keep hands and utensils out of the container while operating to prevent the possibility of severe personal injury and/or damage to the product or property.
Before you use this product for the first time, please take a few moments to read these instructions. Keep them for future reference. Parts 1. 2. 3. 4. 5. 6. 7.
Operating Instructions Connection and Use We recommend that you charge your electric wine opener for at least eight hours before using for the first time. Please follow the instructions for recharging as stated below: Recharging Your Electric Wine Opener Plug one end of the adapter cord into the base of the recharging base and the other end into an electrical outlet.
1. Place the wine opener on top of the wine bottle making sure that it remains as straight/upright as possible at all times. If you hold the electric wine opener at an angle to the bottle it will not remove the cork properly (see fig. 3). (fig 3) 2. Hold the wine opener firmly and depress the lower part of the switch. The corkscrew spiral will turn in a counterclockwise direction and enter the cork, then gradually remove it from the bottle.
©2008 Waring Products Division of Conair Corporation 150 Milford Road East Windsor, NJ 08520 www.waringproducts.
