Instruction Booklet
18
3. If the oven is not in the factory-default setting, the screen will
display 00. Press START to return to the factory-default setting.
The screen will display CLEAR. NOTE: If you do not press
START when 00 is displayed, the oven will not return to the
factory-default setting.
WARNING: Please note that changing back to the factory-default
setting will erase all user-programmed information.
CLEANING INSTRUCTIONS
Always keep the oven clean.
1. Cleaning the glass viewing window, the inner door panel
and oven front face: For best performance and to maintain
a high degree of safety, the inner door panel and oven front
face should be free of food or grease buildup. Wipe these
parts with a mild detergent, rinse and wipe dry. Never use
abrasive powders or pads.
2. Cleaning the control panel and plastic parts: Do not apply
a detergent or an alkaline liquid spray to the control panel
and plastic parts, as this may cause damage to these parts.
Use a dry cloth (not a soaked cloth) to clean these parts.
3. Cleaning the oven interior: After use, be sure to clean up
spilled liquids, spattered oil and food debris as quickly as
possible. If the oven is used when dirty, efciency drops and
the dirt gets stuck on the oven surface and may cause bad
odors. Clean the interior with a cloth soaked in lukewarm
water with a mild detergent dissolved in it, then rinse the
soap off with a damp cloth.
CAUTION: Do not wipe plastic and painted sections of the oven with
bleach, thinners or other cleaning agents, as this may cause these
parts to dissolve or change shape.