Specifications

9
W
W
C
C
-
-
1
1
0
0
0
0
0
0
W
W
I
I
R
R
E
E
C
C
U
U
T
T
T
T
E
E
R
R
SPECIFICATIONS
Air Requirements – 80-120 PSI @ 5 S.C.F.M(Min) Clean Shop Air
Cutting Range – Up TO 1/8” (3.2mm)
DESCRIPTION
The WC-1000 Wire Cutter is designed to remove the ball end of the welding wire for consistent wire stick-out,
providing smoother arc starts and where a desired stick out is required for touch sensing or other operations.
The WC-1000 can be easily mounted to a remote location or directly on the RCS-1000 Robotic Cleaning Station
and can be used with all makes and models of robotic equipment.
INSTALLATION
1) Mount the WC-1000 directly to the RCS-1000 Robotic Nozzle Cleaning Station per the instructions.
2) Program the robot nozzle/welding wire to pass between the cutter blades
3) Program the robot to activate the ground “ON” Lead 4 for a cycle time of 0.5 Seconds. NOTE: This will
activate the wire cutter cylinder to cut the wire without fully activating the RCS-1000 Nozzle Cleaning
Station.
See Wiring Schematic on Page 2 for proper electrical connections.
PARTS LIST – WC-1000
Item
#
Part
Number
Description
1
WC-501
Activator Lever
2
WC-502
Activator Valve
3
WC-503
Cylinder
4
WC-504
Screw
5
WC-505
Cutter Blade
6
WC-506
Screw
7
WC-507
Arm
8
WC-508
Shoulder Bolt
9
WC-509
Pivot
10
WC-510
Stud w/Nut
11
WC-511
Bracket
12
WC-512
Male Elbow 1/4” NPT x 1/8” NPT
13
WC-513
Tee
14
WC-514
Tubing, ¼” OD