Troubleshooting guide

Step 6

Place the pulp container into position by grasping the lip

of the pulp container with one hand and tilting the pulp

container slightly. Place under top cover until it locks

into position.

Step 7

Place the juice collector cup provided under the spout of

the filter bowl.

Disassembling Your Waring Pro

Juicerator

Step 1

Turn the Waring Pro Juicerator

toggle switch to the off

position. Remove the plug from the power outlet.

Step 2

Remove juice cup.

Step 3

Remove the pulp container by tilting slightly to remove from

base.

Step 4

Remove the lid by twisting right to left (clockwise) as far as

it will go to disengage then lift up cover.

Step 5

Remove stainless steel filter basket and filter bowl at the

same time by holding onto the filter bowl spout and pulp

container lip while putting pressure with your thumbs on the

top rim of housing and pulling gently in an upward motion.

For best cleaning results, we recommend cleaning the filter

basket with an Oxo

cleaning brush.

THE STAINLESS STEEL FILTER BASKET

CONTAINS SMALL SHARP BLADES TO CUT

AND PROCESS FRUITS AND VEGETABLES.

DO NOT TOUCH BLADES WHEN HANDLING

THE FILTER BASKET.