Troubleshooting guide

POSSIBLE PROBLEM SOLUTION
Machine will not work
when switched on
Make sure unit is plugged into
proper power supply source. Make
sure all parts are in the proper
working position. Press the red reset
button on bottom of unit. Check your
home circuit breaker or fuse panel to
make sure they are live.
Motor appears to stall
when juicing
Wet pulp can build up under the cover
if the juicing action is too vigorous.
Try slower juicing action by pushing
the food pusher down more slowly.
Excess pulp building
up in the filter basket
Stop the juicing process. Remove
the juicer cover and scrape off pulp.
Re-assemble and begin juicing again.
Try alternating (soft and hard)
vegetable and fruit varieties.
Pulp too wet
and insufficient
Change to low or high speed. Try a
slower juicing action. Remove mesh
filter basket and clean mesh walls
with a fine brush in a solution of 70%
water and 30% bleach. This will
remove excess fiber buildup (from
fruit or vegetables) which could be
inhibiting the juice flow.
Juice leaks between the
rim of the juicer cover
and the filter bowl
Try a slower juicing action by pushing
the food pusher down more slowly.
Make sure unit is clean before use.
Filter bowl – juice sprays
out from spout
Try a slower juicing action by pushing
the food pusher down more slowly.
Make sure juice cup is in proper
position.
12