Specifications

1. Introduction MI 611-211 – October 2005

configuration. You can view one of the other two selections by using the Up and Down arrow

keys. The display will return to the configured selection when the configured TIMEOUT time is

reached. Configuration errors and transmitter and sensor errors are also shown on your display

while in the Measurement mode.

Looking for More Information?

For more detailed information, refer to the following sections of this manual:

♦ For installation information, refer to “Installation” on page 7.

♦ For detailed explanation of the controls and indicators, refer to “Controls and

Indicators” on page 11.

♦ For detailed configuration instructions, refer to “Configuration” on page 17.

♦ For detailed Calibration instructions, refer to “Calibration” on page 30.

For dimensional information, refer to DP 611-163.

General information on this and other electrochemical products are available on line at

www.foxboro.com (pull down Products menu and select Echem Analytical).

If you need additional help, please call 1-866-746-6477 in the U.S.A. or contact your local

Invensys Foxboro representative.

Reference Documents

Document

(a)

Document Description

DP 611-163 Dimensional Print - 870IT Intelligent Transmitters

MI 020-495

PC20 Intelligent Field Device Tool

MI 020-501

PC50 Intelligent Field Device Tool

MI 020-504

PC50 Intelligent Field Device Tool (FoxCom Communication)

MI 611-206 FM and CSA Intrinsic Safety Connection Diagrams and

Nonincendive Circuits

MI 611-208

(b)

Electrochemical Products Safety Information (for European

installations)

PL 611-153 Parts List - 870IT Style B Intelligent Transmitters

(a) Documents are available on line at www.foxboro.com (pull down Products menu and select

Documentation).

(b) Available in many languages on line at www.foxboro.com/us/eng/products/

instrumentation/downloads/ecanalyticalsafety/ecanalyticalsafety.htm.