Specifications

4
cover. (This will allow venting of the rapidly heated and
expanding air present inside the carafe.)
• Keep hands and other exposed skin away from the open
centre of the cover to prevent possible injury when the
blender is in operation.
• Always start blending at the lowest speed setting.
• Whilst blending, up to 330ml (12  oz) of additional liquid
can be added. Pour liquid slowly through the opening in
the cover.
Reset Switch
• In the event that the motor becomes overloaded, the
appliance will cut out.
• Should this occur, switch the appliance off and unplug
from the mains.
• Remove the carafe from the base of the appliance.
• Leave the appliance to stand for 10-20 minutes.
• To reset the appliance, turn the base upside down and
press the red reset switch.
• Replace the carafe on the base, plug into a suitable
mains socket and switch on.
Cleaning & Maintenance
Cleaning the Carafe
• Ensure the appliance is switched off and unplugged from
the mains.
• Remove the carafe from the base of the appliance.
• Clean the carafe and lid to remove as much residue as
possible and empty the carafe.
• Pour a cup of cleaning solution into the carafe and put
the cover on.