Instruction Manual

CAUTION:
1. Read all instructions before starting installation.
2. This product must be installed in accordance with the applicable
installation codes by a qualified electrician familiar with the
construction and operation of the product and the hazards involved.
3. Disconnect power at circuit breaker of fuse before starting installation.
4. To avoid injury, wear gloves during installation.
5. To reduce the risk of electrical shock and product damage, do not
install this luminaire during rain or othe
r storms.
6. Do no
t test luminaire using an electric generator before installation.
Instructions:
ADJUSTABLE LINEAR HIGH BAY
INSTALLATION INSTRUCTIONS
Wiring Diagram
S
S
S
For dimming wires, use class 1 wiring methods.
Cap dimming wires (separately) if not used.
upply Line Black Wire
Luminaire
upply Neutral White Wire
upply Ground Green/ Bare Wire
Violet Wire
0-10V Dim + (pos)
0-10V Dim - (neg)
SAVE THESE INSTRUCTIONS
Chain Mount:(included)
To suspend the highbay luminaire from chains, attach the enclosed v-
hooks to the holes on the end caps. Attach the chain to a secure, stationary
structure, and use the spring clips on the end to attach the chain to the v-
hooks. Choose the appropriate knock out, and wire the fixture in
accordance with proper code. (Figure 1)
Figure 1
Wire Guards:(purchase seperately)
To attach wire guards to the luminaire, snap onto the
adjustable head overtop of the lenses.
Light DirectionAdjustment:
After the fixture is installed, adjust the lighting direction
of the module according to your needs (145° maximum
adjustment from left to right).
Grey or Pink Wire