Instructions / Assembly

Item #16065
Natural Comforts
28” Guinea Pig Cage
Assembly
Instructions
Wood Shelf
#901290
Plastic Base
#901289
Wire Cage Set
#901288
Wood Ramp
#901292
Assembly Complete!
Step 5
Attach the hay manger to the wire on one of the short sides
of the cage. Inserting the bottom edge of the manger above
the 2nd wire up from the bottom and positioning so that vertical wire is in
the center of the slot in the manger. The two hooks on the top of the
manger rest on the 7th wire up from the bottom.
Step 4
Slide the Wood Ramp through the hole in the Wood Shelf.
Then attach the Shelf and Ramp assembly to the 3rd wire up
from the bottom on the left side of the cage. HINT: Attach Wood
Shelf and Ramp to the wire cage before securing wire frame to pan.
Wood Hay Manger
#901291
If you have questions or concerns about this product, contact our
customer service department at 1-800-295-2243 and we will help
you with any problems, Mon-Fri 8:00 – 4:00 MST or email us at
[e-mail]
MADE IN CHINA
to the design specifications of
WARE MFG., INC.
Phoenix, AZ 85009, USA
WWW.WAREPET.COM
#30016065
Revision Date:
4/8/19
Connect the front cage panel (includes
doorway) to the left side panel as
shown. The “J” shaped wire hooks are
specially designed to hook onto the
side panel alternating the connection
back and forth. Then connect the front
panel and the side panel again to
create a woven connection joint.
Repeat this connection between the
remaining panels in each corner using
the alternating “J” shaped hook.
HINT: Start by attaching bottom “J”
hook and move up and attach top “J”
shaped hook last.
Step 2
Step 1
Place the wire panels on a flat surface with the door facing up. Unfold the
front, back, and side panels.
Step 3
Place the assembled wire top with Shelf and Ramp onto the
base making sure the bottom of the wire panels rest securely
along the top edge of the base. Secure the wire panels to the
base using the wire latch located on each side.