Installation & Assembly

Item #16063
Natural Comforts
20” Rat Cage
Assembly
Instructions
Wood Ramp X2
#901287
Wood Shelf X2
#901286
Plastic Base
#901285
Wire Cage Set
#901284
Slide the lower shelf into the 10th wire up from the bottom
on the left side of the cage. Place the short ramp through
the top of the cage and slide into the shelf and position securely.
Step 5
Lift the long ramp up through the opening in the top shelf
and position it securely onto the lower shelf.
Step 6
Slide the upper shelf into the 24th wire up from the bottom
on the right side of the cage, so that the ramp opening is
directed toward the front of the cage. Place the ramp through the top
doorway with the tread side facing down. Next insert the bottom of the
ramp through the opening in the shelf and allow the ramp to hang.
Step 4
Step 3
Place the assembled wire top onto the base making sure
the bottom of the wire panels rest securely along the top
edge of the base. Secure the top wire panels to the base
using the 2 wire latches located on each side.
Connect the front cage panel (includes
doorway) to the left side panel as
shown. The “J” shaped wire hooks are
specially designed to hook onto the
side panel alternating the connection
back and forth. Then connect the front
panel and the side panel again to
create a woven connection joint.
Repeat this connection between the
remaining panels in each corner using
the alternating “J” shaped hook.
HINT: Start by attaching bottom “J”
hook and move up and attach top “J”
shaped hook last.
Step 2
Step 1
Place the wire panels on a flat surface with the door facing up. Unfold the
front, back, and side panels.
Assembly Complete!
If you have questions or concerns about this product, contact our
customer service department at 1-800-295-2243 and we will help
you with any problems, Mon-Fri 8:00 – 4:00 MST or email us at
[e-mail]
MADE IN CHINA
to the design specifications of
WARE MFG., INC.
Phoenix, AZ 85009, USA
WWW.WAREPET.COM
#30016063
Revision Date:
4/8/19