Installation & Assembly

Item #16062
Natural Comforts V
16” Hamster Cage
Assembly
Instructions
Wood Shelf
#901281
Plastic Base
#901280
Wire Cage Set
#901279
Wood Ramp
#901282
Wood Running Wheel
with Washer and Wing Nut
#901283
Unfold the front, back, and side
panels.
Step 2
Place the wire panels on a flat
surface with the door facing up.
Step 1
Connect the front cage panel (includes
doorway) to the left side panel as
shown. The “J” shaped wire hooks are
specially designed to hook onto the
side panel alternating the connection
back and forth. Then connect the front
panel and the side panel again to
create a woven connection joint.
Repeat this connection between the
remaining panels in each corner using
the alternating “J” shaped hook.
HINT: Start by attaching bottom “J”
hook and move up and attach top “J”
shaped hook last.
Step 3
Place the assembled wire top onto the base making sure the bottom of the wire
panels rest securely along the top edge of the base. Secure the top wire panels to the
base using the 2 wire latches located on each side.
Step 4
Slide the wooden shelf between
the 7th & 8th wire up from the bottom on the
left side of the cage.
Step 5
Step 6
Place the ramp in the cage through the top
door, and slide through the hole in the wooden
shelf.
Step 7
Attach the Wheel to the right side between the
7th and 8th wires up from the bottom, using the
washer and the wing nut.
Assembly Complete!
If you have questions or concerns about this product, contact our
customer service department at 1-800-295-2243 and we will help
you with any problems, Mon-Fri 8:00 – 4:00 MST or email us at
[e-mail]
MADE IN CHINA
to the design specifications of
WARE MFG., INC.
Phoenix, AZ 85009, USA
WWW.WAREPET.COM
#30016062
Revision Date:
4/8/19