Brochure
MALLEABLE IRON 45˚ ELL CLASS 150
MALLEABLE IRON 90˚ STREET ELL CLASS 150
NPS
Center
to End
A
Outside
Dia. of
Band
B
Length of
Threads
C (min)
Take
Out
1/8 0.73 0.69 0.25 0.46
1/4 0.73 0.84 0.32 0.32
3/8 0.80 1.01 0.36 0.39
1/2 0.88 1.20 0.43 0.34
3/4 0.98 1.46 0.50 0.43
1 1.12 1.77 0.58 0.43
1 1/4 1.29 2.15 0.67 0.58
1 1/2 1.43 2.43 0.70 0.70
2 1.68 2.96 0.75 0.92
2 1/2 1.95 3.59 0.92 0.81
3 2.17 4.28 0.98 0.97
4 2.61 5.40 1.08 1.31
5 — — — —
6 — — — —
NPS
Center
to End
A
Center
to Male
B
Outside
Dia. of
Band
C (min)
Port Dia.
Male
End
D (max)
Length of
Internal
Threads
E (min)
Length of
External
Threads
F (min)
Take
Out
Male
End
Take-
Out
Female
End
1/8 0.69 1.00 0.69 0.20 0.25 0.26 0.73 0.42
1/4 0.81 1.19 0.84 0.26 0.32 0.40 0.78 0.40
3/8 0.95 1.44 1.01 0.37 0.36 0.41 1.03 0.54
1/2 1.12 1.63 1.20 0.51 0.43 0.53 1.09 0.58
1/2 x 3/8 — — — — — — — —
3/4 1.31 1.89 1.46 0.69 0.50 0.55 1.34 0.76
*3/4 x 1/2 1.31 1.76 1.46 0.51 0.50 0.53 1.21 0.77
1 1.50 2.14 1.77 0.91 0.58 0.68 1.45 0.81
1 x 3/4 — — — — — — — —
1 1/4 1.75 2.45 2.15 1.19 0.67 0.71 1.74 1.04
*1 1/4 x 1 1.75 2.29 2.15 0.91 0.67 0.68 1.58 1.06
1 1/4 x 3/4 — — — — — — — 0.54
1 1/2 1.94 2.69 2.43 1.39 0.70 0.72 1.96 1.21
*1 1/2 x 1 1/4 1.81 2.62 2.43 1.19 0.70 0.72 1.90 1.10
*1 1/2 x 1 1.94 2.54 2.43 0.91 0.70 0.68 1.81 1.25
2 2.25 3.26 2.96 1.79 0.75 0.76 2.50 1.49
2 x 1 1/2 — — — — — — — —
2 1/2 2.70 3.86 3.59 2.20 0.92 1.14 2.72 1.56
3 3.08 4.51 4.28 2.78 0.98 1.20 3.31 1.88
4 — — — — — — — —
* Manufactured to WARD specifications
A
A
C
B
A A
B
F
D
C
E
A
SECTION A-A
Section 1 Page 6
Malleable Iron 90 Street Ell, Class 150
X.BMSL
All information contained within this document is intended for the sole use of Ward Manufacturing
and may not be released, used, copied, or distributed without the express written permission of ...
WARD MANUFACTURING LLC
BLOSSBURG, PA. 16912, USA
(570) 638-2131
TITLE:
MATERIAL:
DRAWN BY:
SHEET:
DATE:
CHECKED BY:
DATE:
SCALE:
SIZE:
SMARTEAM I.D.:
DATE
DESCRIPTION
APR
PART NO.:
REV.
XX-XXXXXXXXX
E.C.O. #
NEW SOLIDWORKS DRAWING
01
XXX
ANGULARITY: ±1
SURFACE FINISH:
63
±.031 FOR THE FIRST INCH,
AND AN ADDITIONAL ±.005
FOR EACH ADDITIONAL INCH
DECIMAL PLACE:
.X ±.03
.XX ±.01
.XXX ±.005
AS-CAST SURFACES
MACHINED SURFACES
UN THREADS - EXTERNAL: CLASS 2A, INTERNAL: CLASS 2B
TOLERANCES AND SPECIFICATIONS
UNLESS OTHERWISE NOTED:
THIS IS A CAD DRAWING,
DO NOT ADD HAND WRITTEN EDITS
XX/XX/XX
3/4 M.I. STREET TEE
D.BMST
Malleable Iron ASTM A197
1
OF
1
01
B
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED
DRAWN IN ACCORDANCE WITH ASME Y14.5
BREAK ALL SHARP CORNERS AND REMOVE ALL BURRS
DRAFT ANGLE IS 2° UNLESS NOTED OTHERWISE
THREADS:
REV.
8