User Manual

PALM GARDEN ENTERPRISES CORP.
10
Switching Between Music and Phone Calls
1.Setting Up / Prerequisite
Find a Bluetooth receiver. Please confirm the receiver has been added to a
list of “Paired Device” in the Bluetooth enabled cell phone.
*Note:
1. If you haven’t paired the receiver with the Bluetooth enabled cell
phone before, please refer to the user manual of the receiver.
2. Some cell phones require that an explicit connection be established
with the receiver. For example, Nokia 3650 requires a Bluetooth
connection to the receiver be initiated and stay connected before
proceeding further. Other phones may initiate a Bluetooth
connection only when a call is received. Please refer to the user
manual of the cell phone being used and fully understand its
behavior.
3. Some cell phones send the ring indication to the receiver while
others do not. If your cell phone supports this feature, you should
hear the ring tone of your cell phone on the receiver. Phones that do
not support ring indication will automatically accept the call.
2. Making the Switch
(1) Repeat the procedure ”Enjoying the Superior Music Quality” and play
music.
(2) Use the cell phone and find the receiver on the “Paired Device” list. Then,
operate the cell phone to connect to the receiver.
(3) When the connection is set up, the music will pause and you can switch to
the cell phone mode automatically. You can start to make an outgoing call
and are able to converse over the phone.
(4) When your conversation is done and you stop using the cell phone, the
streaming of music will resume immediately and automatically.
(5) If someone calls you, the music will pause and you can answer the
phone.
(6) After the phone call ends, the music will resume again.
(7) You can repeat this scenario and switch freely between cell phone and
music mode.