User's Manual

PALM GARDEN ENTERPRISES CORP.

Before You Use

Please make sure the battery power of the headset and the TX is sufficient. If

the power is low, the charging LED indicator of headset or TX will start to

flash.

Please charge the headset and the TX when you see the low power signal.

When you are charging the battery, TX or headset charging LED indicator will

constantly on. When the battery is full, the light of headset or TX will shut off

automatically.

Responding to Cell Phone

1. Setting Up

Before you turn on the headset and TX, please use the USB charging cable

to charge them.

2. Pairing

(1) Turn on the Bluetooth enabled cell phone.

(2) Turn on the headset.

(3) Operate the Bluetooth enabled cell phone to search headset

Note: Users need to keep the two devices between 2 meters in case of

connection failure. The status LED indicator of headset will be constantly

on during search.

(4) Enter PIN code “0000” when the pop-up screen is shown on the cell

phone.

(5) Pairing is done while the status LED indicator start flashing.

3.Connecting

(1) ”Pairing” creates a link between Bluetooth enabled cell phone and Stereo

Headset. It allows the phone to remember the headset’s unique Bluetooth

ID. You could add it to a list of “Paired Device” in the phone.

(2) The headset only needs to be paired ONE time with the phone before

use.

(3) Once the headset is paired, it can be easily connected to the phone.