User's Manual

PALM GARDEN ENTERPRISES CORP.

FAQ

1. Q : How do I know that the battery of the headset have insufficient power?

A : The battery power is almost exhausted when one or more following

scenarios happen:

(1) The headset starts to reset automatically.

(2) You can constantly hear breaks on the audio link, or

(3) You cannot connect the headset to the TX after several tries.

2. Q : Why cannot I create a connection to the headset?

A :

(1) Verify that the battery power of headset is not running low.

(2) Check if the headset is powered on and the indicator LED is steadily light

on.

(3) Verify that the headset is within the specified range of 10 meters from the

audio source.

(4) Check if any other Bluetooth device has connected to the headset. If

headset is connected with other devices, the indicator LED on the

headset is flashing.

(5) Turn both the headset and the audio source device off. Power on the

headset on and then power on the audio source and try connecting again.

3. Q : Can I adjust volume when I am in the phone mode?

A: The volume key can be adjusted in both music and phone mode.

4. Q : Why do I hear beep from the headset?

A: The beep means the headset is in the low power status. The headset will

beep every 20 seconds to remind you to charge it. Meanwhile, the charging

LED indicator is flashing.

5. Q : How do I know the maximum and minimum volume?

A: You can hear beep if you adjust the volume up key to the maximum. If you

adjust the volume down key to the minimum, you can also hear beep.