User Manual

第
4
页 共
6
called, after the exit of the interface before the operation mode, the test mode which
can adjust the X axis motor, Y axis motor and focus motor position, as well as
RGBWAP six color brightness.
3) Display settings
● Chinese, used to set up the Chinese display.
● English
，
used to set up the English display.
● ScreenSaver, used to set the screen saver, mode1 Screensaver displays a black
screen, mode2 screen display mode for operation mode.
● ScreenRotation, when the lamp is upside down, 180 degree flip for setting a
display.
4) Advanced settings
● Pan Invert, Setting PAN’s Rotation direction: ON-forward OFF-reverse.
● Tilt Invert,TILT rotation direction: ON-forward OFF-reverse.
● Reset DMX
，
clear channel DMX data.
● Reset System
：
manually reset motor.
● Cool Fan, Setting cooling fan working mode: ALWAYS-normally work;
AUTO-Intelligent Control.
● PanAngle, Setting PAN’s Rotation rate: [540] or [630]
● PanOffset
，
Setting PAN’S initial offset position: 0-128.
● FactorySet, set the parameter settings for the factory parameter.
5) SysInfo, show the system information:
● WorkMode
，
Show the current working mode.
● DMXAddress
，
Show the current address.
● Version
，
Show the version of the lamp.
● Elapse
，
Working hours from start the lamp this time.