Product Specs

SLU-A1000-B
10
4.2 Anchor Installation
After the location of the anchor is selected, the next step is to install the
anchor. During the installation, the principles below should be followed.
 The anchor should be more than 30cm away from the wall,
or 50cm away from the metal wall.
 The height of the anchor to the ground is generally between
3m and 5m
 The anchor must leak out, not be embedded in the ceiling
and away from metal objects.
 Indoor anchor must be installed with body face down
Indoor anchor installation and debugger
Install the indoor anchor with the raised side of the anchor facing down,
as shown in the figure below.
Record the location and ID number of the base station during installation,
so that the anchor coordinates can be set when the system is debugged.