Product Specs

SLU-A1000-B
9
For each two-dimensional positional area, at least four anchors need to be
installed, respectively installed in the four corners of the area. If two
positioning area are interlinked, then the anchor located on the dividing
line of two cells can be reused by the two areas.
Generally a complex area will also contain a
one-dimensional/two-dimensional/zero-dimensional positioning, for zero
dimension in the meeting room, one dimension in the corridor, two
dimension in the office or the hall. An overlap area should be set at the
junction of one dimensional and two dimensional areas to ensure the
fluency of switching between the two areas.