User's Guide

6
2 Getting Started
2-1 Connecting the Power Adapter
The Mini PC comes with a universal AC-DC adapter and the allowable input voltage
of adapter is from 100V to 240V.
Following the below steps to connect
the adapter:
1. Take the adapter and the power cord,
and then connect the adapter with the
power cord.
2. Plug the DC end of adapter into the
power jack of the Mini PC.
3. Insert the AC end to the wall outlet
4. Check the connections above correctly
before turning on the Mini PC.
DO NOT remove the Mini PC if the HDD is being read or written, that may
result in the loss of the data and the damage of the disk. Follow the system
steps to turn off the Mini PC.
Your Mini PC and the accessories may differ from the pictures shown.
2-2 Turning on the Mini PC
1. After connecting the power adapter, the blue aura would appear around the Power
button.
2. Press the Power button to turn on the Mini PC.
Press and hold the Power button to turn off the Mini PC if the system halts.
Press and hold the Power button once to turn off in normal mode.