User's Guide

3
Safety Precautions
1. DO NOT expose the Mini PC to dirty or dusty environment. Keep the
environment clean and dry.
2. DO NOT expose the Mini PC to strong magnetic or electrical fields; DO NOT
place the floppy disk near or on the Mini PC, that may loss the data of the floppy
disk.
3. DO NOT leave the Mini PC facing the sun as it can damage the parts.
4. SAFE TEMP: This Mini PC should only be used in environments with ambient
temperatures between 5(41) and 35(95).
5. DO NOT expose the Mini PC to or use near liquids, rain, or moisture.
6. DO NOT throw the Mini PC in municipal waste. Check local regulations for
disposal of electronic products.
7. The Mini PC only for Desktop computer using. Also the Mini PC and the
Adapter may occur some heat during operating or charging. DO NOT leave the
Mini PC on your lap or any part of the body in order to prevent discomfort or
injury from heat exposure.
8. INPUT RATING: Refer to the rating label on the Mini PC and be sure that the
Power Adapter complies with the rating. Only use attachments or accessories
specified by the manufacturer.
9. Checking the connections between the main unit and attachments before
turning on the Mini PC.
10. DO NOT insert anything into the Mini PC that may result in short circuit or
damage the circuit.
11. DO NOT disassemble the Mini PC, only a certified service technician should
perform repairs on your computer. Otherwise, problem may result and the
manufacturer should not hold responsibility for the damage.
WARNING: To satisfy FCC RF exposure requirements for mobile transmitting
devices, a separation disatance of 20 cm or more should be maintained
between the antenna of this device and persons during operation.
To ensure compliance, operations at closer than this distance is not recommended. The
antenna used for this transmitter must not be co-located in conjunction with any other
antenna or transmitter.