Applicant: WANLIDA GROUP CO., LTD. FCC ID: SMFMP1607 Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents Congratulations on purchasing your Myron & Davis. Read this manual to get started using your Myron & Davis quickly. Important Safety Instructions.......... 2 Precautions with Moisture .......... .3 Function Features ...................... .4 Parts Introduction ....................... .5 Remote Control .......................... .8 Connections ............................... .10 Preparation ................................. .11 Use of Remote Control.......... .
Important Safety Instructions WARNING: To reduce the risk of fire or electric shock, DO NOT expose this product to rain or moisture. The lighting flash with arrowhead symbol within a triangle alerts the user to dangerous voltage which could cause electric shock. The exclamation point within a triangle indicates to the user to read important operating and maintenance instructions in the manual. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT NOTES 2.
Precautions with Moisture Under the following circumstances, moisture may appear on the lens of the product, which is the most sensitive part of the DVD player. - The DVD player is suddenly moved from a cold place to a warm place. - A room is heated while the DVD player starts operating, or the DVD is placed by an air-conditioner. - In the hot summer season, the DVD player is moved from an air-conditioned room to a hot, damp place to be used. - The DVD player is being operated in a damp place.
Function Features 7. LAST MEMORY PLAYBACK 1. EXCELLENT SOUND Store the stopped playback track in Dolby Digital delivers great sound. memory and continue playing disc 2. HIGH RESOLUTION from this spot. MPEG2 decoding format achieves 8. ON-SCREEN DISPLAY more than 500 lines of horizontal You can choose English, Spanish, or resolution. French 3. SPECIAL FUNCTIONS Supports language caption ON-SCREEN display 9. AUDIO OUT parental-lock. Analog audio output. 4. COMPATIBILITY 10.
Parts Introduction DVD Player 1. 2. +/- button 3. MODE button 4. TFT Liquid Crystal Display NEXT SKIP button PREV SKIP button 5. 6. STOP/ OFF button PLAY / ON button 7. Speaker 8. Remote sensor 9. Indicator light 10. AUDIO jack 11. VIDEO jack 12. Stand fixing hole 13. DC 9.5V input jack 14. OPEN button 15.
Parts Introduction Front View 1. Latch hook Left View 1.
Parts Introduction Bottom View 1. Battery contacting point 2. VIDEO input jack 3. AUDIO input jack 4. AV IN/OUT switch 5. FM CH1 (fixed frequency 88.4) FM CH2 (fixed frequency 88.1) FM OFF switch 6. DC 9.
Remote Control -9-
Remote Control 1. 2. 3. 4. 5. PWR button -Press to turn the player on or off. INFO button -Press for detailed information on the disc playing. -Keep pressing to remove information from screen. TITLE button -Press to display titles if present on the disc. Direction buttons -Press to select menu items. Enter button -Press to confirm the items or settings. 6. SETUP button -Press to access the DVD players setup menu. 7. 0-9 number buttons -Select numbers by pressing these buttons. PREV SKIP button 8.
Connections Connect to a TV Audio/video connections 1. Always ensure that the DVD player, TV and any other electrical equipment connected to DVD player is switched off and unplugged from the power supply. 2. Connect the DVD player to the TVs audio/video inputs with audio/video cables. Connect to an Amplifier The DVD player can be connected to an AV amplifier. Please refer to your Audio equipments manual before connecting.
Preparation Use of Remote Control 1. According to the drawings above, take the back cover off the remote control, then pull the empty battery tray out. 2. Prior to shipping, a separating film was covering the battery. Remove this film. 3. Place the battery into the tray and then insert the tray into the remote control. 4. For best usage, aim the remote directly at the players receiving window from a range no greater than 15 feet, and at angles no greater than 60 degrees. 5.
Preparation Compatible Disc Formats The unit can play discs bearing any of the following logos: DISC LOGO DIAMETER 12cm PLAYBACK TIME/ PLAYABLE SIDES 13 3 m i n S S -S L 242 m i n S S -DL 266 m i n DS - SL 484 m i n DVD 8cm DS -DL 41 min ( SS-SL ) 75 min ( SS-DL ) 82 min (DS-SL) 150 min 12cm 74 min 8cm 20 min 12cm 600 min (DS-DL) CD MP3 (no logo) Operation method of some DVD discs is specified by the software manufacturer. Please follow the instruction manual of the disc.
Preparation Use of AC Adapter The player is supplied with a power adapter. 1. Connect AC adaptor to the side of the DVD player in the slot marked DC 9.5V IN. 2. Plug the two-prong end of the power cord to a grounded electrical socket. Note: Please turn players power off before unplugging. Pre-operation 1. Connect to power. 2. Press OPEN button to open disc cover. 3. Put disc into the tray with printed side up. 4. Close the disc cover. 5. Pressing button on the front panel to turn on the player. 6.
Preparation Use of Car adapter You can use Car Adapter while in a vehicle: Connect the Car Adapter Power Plug into the units Power Jack and the other end to the Vehicle Cigarette Lighter Socket. Attention: Do not operate the unit or view video software while driving a vehicle. Place the unit in a proper position for viewing. Please detach battery pack when using car adapter as power source. We advise you power off the player at the instant of car start-up.
Basic Operation Please read the following instructions carefully before using your DVD player for the first time. 1. Turn on the players power by pressing 2. Press OPEN button to open the disc cover. 3. Load disc with the label side up. 4. button on the front panel. Close the disc cover. The player will automatically search for the disc and play it. Warning: Do not play poor quality discs to prevent damage to lens. Begin Play button on the remote control. 1. Press 2.
Basic Operation Stop 1. During play, press 2. Press button on the remote control to stop playing. button to continue playing from the point where it last stopped. Mode Press MODE button on the control panel to change the level of brightness, contrast and color. Please adjust these levels with + and buttons on the control panel. Pressing MODE button to display the screen as follows: Normal LB/4:3 Rotated WIDE/16:9 Rotated LB/4:3 Normal WIDE 16:9 Title Menu 1.
FM Transmitter Use This unit is equipped with an audio frequency transmitting function; you can use any FM equipment to receive a signal from it. The FM regulator is regulator is on the bottom of the player. Please follow the steps below: 1. Switch to CH1 or CH2 to open FM transmitter during play. Regulate the volume to your satisfaction. 2. Turn on your FM receiving equipment and regulate the frequency to match the unit (FM88.4 for CH1, FM88.1 for CH2). 3.
System Setup SETUP You can change the default settings to customize performance to your own preference. 1. Remove the disc from the DVD drive and press the SETUP button on the remote control. The settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference Setup. Press SETUP button again to exit setup menu. 2. Press (direction buttons) on the remote control to select a category. 3. All the items in the category will appear on the TV screen.
System Setup 3. Captions 4. Screen Saver You can turn captions on or off during play. Press setup button on the remote control to enter general setup, move the highlight to screen saver by Enter or 5. buttons, enter screen saver item by button and then select on or off. Last memory Press setup button on the remote control to enter general setup, move the highlight to last memory by buttons, enter last memory item by button and then select on or off. Speaker Setup 1.
System Setup Video Setup 1. Sharpness 2. Brightness 3. Contrast Use this item to adjust sharpness setting. Use this item to adjust brightness level. Use this item to adjust contrast level. Preference Page 1. Audio, Subtitle, Disc Menu This setting allows you to hear or read subtitles in English, French, Spanish, Chinese, Japanese, Korean, Russian or Thai. 2. Parental Control DVD discs equipped with the child lock function are rated according to their contents and settings vary from disc to disc.
Play Functions Audio DVD discs contain up to 8 audio bit streams. For Example: English, French etc. To select the audio bit stream you prefer press the AUDIO button on the remote control during play. The DVD player will play the next audio bit stream every time you press the AUDIO button in succession. NOTE: This function is only available for discs onto which several audio bit streams have been recorded. Fast Forward & Rewind to fast-forward and press Press to rewind.
Play Functions Search by time You can use the GOTO button to search by time, i.e., to play from a given time. During DVD playback, press GOTO button to display the title or chapter, then press number buttons to select the scene you want to watch. Resume Play 1. Press button at the spot that you wish to stop. The player memorizes the track where playback was stopped. 2. Press button to resume normal play. The player resumes play from where you stopped last time.
Play Functions Playing an MP3 disc MP3 is the third audio compression format of international standard MPEG, which compresses the audio signal at the rate of 12:1. Using MP3 format, one disc can record more than 600 minutes of music, and the sound quality is similar to that of CDs. There are many different formats for storing MP3 songs. Usually, one MP3 disc includes many folders (directories) and every folder includes several files (songs).
Play Functions Playing a JPEG disc JPEG is a common picture format that has small file size and low quality loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to utilize real digital album, use film to make a PICTURE CD in JPEG format. OPERATION 1. Normal Playback Load a JPEG disc. OSD will display the menu (the left side is the main menu and the right side is submenu). Press the direction buttons to choose item and then press Enter to confirm your selection.
Care of Discs How to hold discs When loading or removing discs, try not to touch their playing surfaces. Cleaning Fingerprints or stain on the disc may affect the quality of sound and picture. To clean your discs, use a soft clean cloth to wipe them. If necessary, moisten a soft cloth with diluted neutral detergent to remove heavy dirt or fingerprints. Cleaning Care Use a soft, dry cloth for cleaning. For stubborn dirt, soak the cloth in some detergent; ring well first and wipe.
Troubleshooting SYMPTOM HOW TO CHECK The player cannot play. - Please make sure the disc cover is closed. - Please make sure a disc is loaded. - Please make sure the disc isnt loaded upside down. - Disc should be clean, not dirty or warped. - Players region code should be the same as region code of DVD disc. - Is there water condensation on the lens? If so, remove the disc and keep the player powered up for at least two hours. There is no sound. - Please make sure system connection is correct.
Specifications TFT screen size 7 inches Laser Wavelength 780/650nm Video System NTSC Frequency Response 20Hz 20kHz ±2.5dB Audio Signal-to-noise Rate 85dB Audio distortion + noise -70dB Channel Separation 70dB 1kHz Dynamic Range 80dB 1kHz Audio Out Analog Audio Out Video Out Video Out Power AC 100-240V Power Consumption 1kHz 0.2 Out Level: 2V±1.0 , Load: 10k Out Level:1V P-P±0.2, Load:75 Unbalanced Negative 50/60Hz 25W Dimensions 200mm x 156mm x 30mm (L*W*D) Weight 0.
