User manual

Motor wires :
The bundle of electrical wires that provide power to the motor.
Nozzle:
The opening on the end of the extruder from which heated wanhao
Filament emerges to be spread onto the build plate。
Plunger:
A part of the extruder assembly. The MK9 plunger pushes the wanhao
Filament against the drive gear.
Power supply:
The power supply for the wanhao duplicator 4/4X. It includes a
block and two plugs.
SD Card:
Secure Digital memory card that can store digital data and be read by
duplicator 4/4X and has a maximum capacity of 2GB.
Spacers:
The plastic pieces that keep the extruder fan and heat sink secure and in
place.
Spool holder:
The plastic piece that attaches to the back of wanhao duplicator
4/4X and holds the spool of wanhao Filament. The spool holder ensures that the
Filament is fed evenly to the extruder.
Thingshares:
A website for uploading and downloading 3D model files for use
with the wanhao duplicator 4/4X.
Threaded rod:
The long rod behind the build platform that is threaded along its
entire length. This rod allows the build platform to move up and down, or along
the Z-axis.
.stl :
A widely used file format for 3D models.
USB cable :
The cable that allows the wanhao duplicator 4/4X to communicate
with a computer using the USB interface on the computer.
.X3G:
A compact format for describing the toolpath your wanhao duplicator 4/4X
will use to build an object.
E Troubleshooting , Diagnostics , and Maintenance
45
--------------------------------------------------------------------------------------------------------------------------------------
--------