User manual

USING WANHAO REPLICATORG
--------------------------------------------------------------------------------------------------------------------------------------------
D Making an Object with Wanhao Replicator G
34
------------------------------------------------------------------------------------------------------------------------------------------
--------
3. Open WanHao Replicator G
[1] Zoom in and out：
You can also
use the scroll wheel on your mouse
to zoom in and out.
[2] View:
Click the View button to
go into View mode. In this mode,
click and drag with your mouse to
rotate the plate and the object.
[3] Move :
Click the Move button to
go into Move mode. In this mode,
click and drag with your mouse to
to move an object around the plate.
[4] Rotate:
Click the Rotate button
to go into Turn mode. In this mode,
click and drag with your mouse to
rotate the object in all directions.
[5] Mirror:
Click the Mirror button
to go into Mirror mode. In this
mode, click the buttons at the upper
side of the right to reflect the object
in X, Y, Z respectively.
[6] Scale :
Click the Scale button to
go into Scale mode. In this mode,
click and drag with your mouse to
to enlarge or shrink your object. Use
the bottons at the upper side of the
Scale button to open the Change
Dimensions submenu and scale
by a percentage or to a specific
measurement.
[7] Generate GCode:
Click this
button to open the Generate GCode
dialog, where you can specify print
resolution and other options and
click Generate GCode for building.
[8]
Click the "gcode" at the forth
Status Bars and adjust the HBP
printing temperature based on
your printing material (see FAQ on
www.wanhao3dprinter.com). After
adjustment, choose printing. ABS
HBP printing temperature: 110 ℃ ;
PLA HBP printing temperature：
60℃