User manual

MAKING A TEST OBJECT FROM THE SD CARD
----------------------------------------------------------------------------------------------------------------------------------------------
1. Locate the SD Card
2. Select a Project from the SD Card
The WANHAO DUPLICATOR package
includes an SD card pre-loaded with
files for making test objects.
SD Card
After you have successfully leveled the build platform and loaded the PLA
Filament into the extruder, the LCD panel will say: “I am ready”
A：Use the up and down arrow buttons to navigate through the list of models on
the SD card.
B：To select a model, press OK.
C：The Printer will begin to build your object. You can use the LCD panel to monitor
the temperature of the extruder and the status and progress of your object.
C
Startup process: leveling, loading , testing
---------------------------------------------------------------------------------------------------------------------------------------
--------
29
more object availiable please download from our websiteShare
: WWW.THINGSHARES.com