User manual

Loading PLA Filament

--------------------------------------------------------------------------------------------------------------------------------------------

When you have completed the initial leveling tasks, the LCD menu will display the

following text: “I am Ready”. Before building, youmust load the PLA Filament

into the extruder. The extruder will heat the PLA Filament and use the melted

material to build things.

What You Will Do

• Remove the end of the

filament guide tube

from the hole in the top

of the extruder.

• Feed the free end of the

PLA Filament from the

spool into the end of

the filament guide tube

where it attaches to the

back of the Printer

• Push the PLA Filament

all the way through the

filament guide tube.

• Wait for the PLA

Filament to heat and

extrude.

extruder

Filament

Guide Tube

Filament Spool

Startup process: leveling, loading , testing

------------------------------------------------------------------------------------------------------------------------------------------

--------