User manual

LEVELING THE BUILD PLATE

--------------------------------------------------------------------------------------------------------------------------------------------

2. Adjust the Knobs as Directed

The script will prompt you to adjust the

knobs individually. As you adjust each

knob, make sure the A4 Paper just slides

between the nozzle and build plate.

You should feel some friction on the A4

Paper but still be able to easily pass the

Paper between the plate and the extruder

nozzle without tearing or damaging the

paper.

3. Adjust Each Knob Again

The script will prompt you to adjust each

knob again. This allows for fine tuning.

This time, the A4 Paper should slide between

the build plate and nozzle with more friction.

4. Confirm your Adjustment

After the second set of adjustments, the

nozzle will move to the center of the build

plate. Confirm that the the A4 Paper slides

between the nozzle and plate with a moderate

amount of friction.

Startup process: leveling, loading , testing

---------------------------------------------------------------------------------------------------------------------------------------

--------