User manual

After you power on the WANHAO DUPLICATOR Desktop 3D Printer, the
LCD panel will light up and display text. The LCD panel will now run the
Startup Script. The Startup Script will guide you through leveling the
build plate, loading WANHAO PLA Filament, and creating your first build.
THE LCD KEYPAD
•
Four arrow buttons surround a central
OK button. Use the arrows to navigate
through the LCD menus and make
selections.
•
The left arrow usually allows you to
go back or cancel an action.
•
OK button means the Printer is working.
NOTE: Use the up and down arrow buttons to scroll through the top-level menu
on the LCD panel, and use the OK button to select Utlities. You can use the left
arrow to return to the Startup at any time. We also have vedios for you about
this item. If you have problems or questions, refer to the troubleshooting chapter
in this manual or contact WANHAO Support at [e-mail].
C
Startup process: leveling, loading , testing
18
------------------------------------------------------------------------------------------------------------------------------------------
--------