User`s manual

7
• It is dangerous to use the worn tire, it will effect to the friction between tyre and road.
Ÿ It will possibly bring trouble or driving or even an accident.
Start engine (Fig 19)
• Put the key into ignition switch and turn to “ ”.
• Electric starter: press start button (1) to start engine, DO not
use the starter more than 5 seconds each time.
NOTICE：
• Electric starting is only in the condition of grasping the brake
handle.
• If electric starting is not succeeding, before starting again
with it, we must stop for 30 seconds If still can’t start. Please
use kick-start level.
• Engine kick-start: open ignition switch and add gasoline slowly, step kick-starter pedal
down quickly with strength to start engine.
Notice: After using kick-starter pedal, pull it back to original position, otherwise it will effect
safe riding, and do harm to the engine.
• Had better not open ignition switch when scooter has not use for a long time, and first step
kick start for some times. Make flue into carburetor and then into cylinder, and ignition
switch, start engine, it is easy to start engine like this.
• When cold start before driving please warm up engine for 3minutes.
Drive the motorcycle:
WARNING:
• Wear the trousers to avoid touching with exhaust pipe and was burnt.
• All the device must be installed according to requirement of the traffic rule.
Take the license to ride.
Each equipment of the motorcycle should accord with the traffic law of local
government。
NOTICE:
Control the speed and payload during the first1000km.Payload among150kg is appropriate
(including driver) overtaking and overloading will shorten the life of engine
Fig19