User`s guide

E.BATTERY AND ELECTROLYTE ●Turn out the cap of fuse case and take out the fuse.

INSPECTION:

●This series use M/F Battery so you do not have ●If fuse connection is not good,the fuse will

to inspect elcctrolyte. overheat and breakdown.

NOTICE: INSTALL:

●Absolutely do not open the lid of battery. ●Install the fuse into fuse case and fasten the cap.

●Battery may produce flammable air.Take care of

fire when install or remove.

●Try to pull the fuse after instal.If loose,the

fuse will overheat and breakdown.

●If not used for a long time,battery may self-

discharge.To prevent the leak of electricity,

NOTICE:

recharge battery first and place it at a cool place.

If battery is kept on the motorcycle,disconnect

●Do not use any fuse whose specification is

negative terminal. different form assigned.It is the main reason

for wiring burning.

F.FUSE REPLACEMENT:

●When replace electrical parts,use Wang Ye

REMORE:

accessories according to the specification.

Then fuse not supplied by Wang Ye.may burn up