User`s guide

●Replenish the specific brake oil up to the above ●Do not mix both specific and non-specific oils
of the mark "LOWER"then screw up the cover together,otherwise,it will cause a chemical
screws. reaction and lead to brake failure.
●Do not let the water penetrate into the main
●Brake oil:DOT-3(Recommendation:
cylinder,otherwise,the boiling point will be
exclusive oil) lowered and lead to be choked.
●The painting surface and plastic parts will be
●Assemble the seal,tank cover and upper handle cover.
corroded by the brake oil.In case of spilt,
please be sure to clean promptly.
NOTICE: ●Please find out the problem with your
●Use only the specific brake oil,otherwise,the
service center if the standard level of brake oil
rubber seal will be distorted and lead to oil is not able to reached.
leakage.The function will not work.
25