USER'S GUIDE 50CC
L I S T I. VARIOUS PARTS NAME:----------------------1 1.OFF:--------------------------------------------------6 II: VARIOUS PARTS OPERATION:----------- 3 2."●"-------------------------------------------------6 A.INSTRUMENT PANEL:---------------------3 3."○"--------------------------------------------------6 1.Speedometer: -------------------------------- 3 E.DIMMER SWTTCH: -----------------------------6 2.Accumulated distance meter:------------------3 1.
L I S T Ⅲ. HOW TO START ENGINE :--------------------------------------9 E. RIDE CAREFULLY ESPECIALLYIN A. START ENGINE WITH RAIN:--------------------------------------------14 ELECTRICITY:----------------------------------------9 Ⅴ.HOW TO STOP:-----------------------------------14 B. START ENGINE WITH KICK STARTER PEDAL:-------------------------------10 14 A. NEAR PARKING PLACE:-------------------------B. MOTORCYCLE STOPS 11 COMPLETELY:---------------------------------------15 Ⅳ.
L I S T E.STOPLIGHT INSPECTION: F.TURN SIGNAL LIGHT INSPECTION G.TIRE INSPECTION: H.SHOCK ABSORBER INSPECTION: I.HEADLIGHT AND TAILLIGHT INSPECTION: J.HORN INSPECTION: K.SPEEDOMETER INSPECTION: L.BACK MIRROR INSPECTION: Ⅶ.PERIODICAL INSPECTOION: A.OIL AND FIL TER: 1.Air cleaner replacement: 2.Oil change and filter cleaning: 3.How to change oil and clean filter: B.GEAR OIL CHANGE: 19 19 20 20 20 20 21 21 21 22 22 22 22 23 1.How to change gear oil: C.REPLENISHMENT OF BRAKE OEL: (DISK BRAKE) D.
I.
FRONT BRAKE LEVER MULTI-PURPOSE CASE TAIL/STOP LIGHT MAIN SWITCH MAIN STAND 2
II. VARIOUS PARTS OPERATION A .INSTRUMENT PANEL: 3 2 1. High beam indicator: ● Turn on headlight switch at night.If dimmer switch is at "HI",the indicator will light and it indicates high beam. 2. Speedometer: ● Forward speed is based on lkm per hour: 3. Accumulated distance meter: ● Total forward distance is indicated by km The black number with white background indicates 100metre. 4.
5. Fuel meter: ● It indicates the fuel volume in the fuel tank. (Turn on main switch first) ● If the needle points at red section,it indicates that the effective residue fuel is about 1.5 liters.Fill with gasoline as soon as possible 6. Oil changing director: ● It points out when must change engine oil. ● In the usual time it will be in green color,but it will change to red color when must change engine oil. ● After changed the engine oil,Insert your key. into the release hole,then the director turn.
1.OFF: ● The electric power ofengine is turned off and engine stop ● you can take.offthe key ● Do not park at the place retarding traffic. C.STARTER SWITCH BUTTON: 2.ON: ● The electric power of engine is connected and you can start ● You cannot take off the key. 3.LOCK: ● The steering handing is locked. ● You can take off the key. NOTICE: ● After locking,turn steering handle gently to ● Press down starter switch button to use electric starter: make sure it is locked up.
NOTICE: After engine start.release the button at once. Do not use the button more than 4 seconds each time. When engine in operation, do not press down the button to avoid bad effect on engine. D.HEADLIGHT SWITCH: 1.OFF: ● Headlight,instument light and taillight extinguish at the sametime. 2. "●": ● Position light and instrument light light on at the same time. 3. " O": ● Headlight,instument light and taillight light on at the same time. E.DIMMER SWTTCH: 1.HI: High beam 2.
● To light far away, change over the switch to "HI". While a vehicle approaching in front or riding in downtown, if keep high beam, it will affect the vision of others.Change over the switch to "LO" F. HORN SWITCH BUTTON ● If high beam, the high beam indicator on instrument panel will light. ● Turn on main switch and press down horn switch button to sound horn. G. TURN SIGNAL SWITCH 1.L. ← ● Use when turn left 2.L. → ● Use when turn right. Use turn signal lights while turning or changing lanes.
● To light far away, change over the switch to "HI". While a vehicle approaching in front or riding in downtown, if keep high beam, it will affect the vision of others.Change over the switch to "LO" F. HORN SWITCH BUTTON ● If high beam, the high beam indicator on instrument panel will light. ● Turn on main switch and press down horn switch button to sound horn. G. TURN SIGNAL SWITCH 1.L. ← ● Use when turn left 2.R. → ● Use when turn right. Use turn signal lights while turning or changing lanes.
●If use turn signal lighte,the turn signal indicator on instrument panel in the same direction blinks at the same time. NOTICE: ●Turn signal lights cannot stop automatically. Return it to the original position after use,or it will affect traffic safety. ●If main switch is at"OFF",turn signal lights cannot operate. H. MULTI-PURPOSE CASE: NOTICE: ●Do not load stuff more than 3kg. ●It is very hot in the case: Do not deposit any article which can be easily burned.
Ⅰ. STEERING HANDLE LOCK: 2. Unlocking: ● Turn the key to clock-wise to unlock. NOTICE: ● After locking, turn steering handle gently to make sure it is locked off. ● Do not park at the place retarding traffic. Ⅲ. HOW TO START ENGINE A. START ENGINE WITH ELECTRICITY: ● To prevent stealing, lock steering handle while parking. ● Turn main switch to "ON". 1. Locking ● Turn steering handle to full left and turn key counter clock-wise to lock.
● When the key is turn to ON, check turn signal light if work well NOTICE: ● After engine start , leaveve the fingle away from the button at once. ● Start engine with electric starter: Do not turn throttle grip,just press down starter switch button to start engine ● If engine is in operation,do not press down starter switch of it will have bad effect on engine. ● Do not use starter more than 4 seconds each time. B. START ENGINE WITH KICK STARTER PEDAL: ● If motorcycle has not been used for a long time.
Ⅳ.HOW TO RIDE MOTORCYCLE: NOTICE: ●Release rear brake lever: ●After using kick starter pedal,pull it back to original position. ●Add gasoline slowly with throttle grip and then motorcycle will move forward smoothly. ●The carbon dioxide exhausted from engine is harmful.Do not start engine where is narrow or ventilation is not good. NOTICE: ●Do not add much gasoline suddenly with throttle grip to prevent motorcycle out rush unexpectedly.
B.SPEED ADJUSTMENT: A.START RIDING: ●Speed can be adjusted under the control of throttle grip. 1.Turn: ●Speed becomes fast. ● Turn on turn signal lights before move. ● Make sure it is safe behind before moving forward.
●Add gasoline slowly. ●If the motorcycle is within 3000km,keep speed below 60km/hr: ●Do gearshift properly to match engine r.p.m. with motorcycle speed ohile climbing. ●Do not increase speed abruptly ●Do not operate engine at high r.p.m.without load. 2.Return: ●Speed becomes slow. NOTICE: ●Do it swiftly when return to original position. C.PROPER RIDING MAY LENGTHEN THE LIFE OF MOTORCYCLE: ●Apply one side buake only may cause motorcycle slip up.
●While braking, pull front brake lever and step down rear brake pedal slowly in the beginning, the tightly. It is the best way to brake. D. DO NOT BRAKE OR TURN AROUND ABRUPTLY ● Brake or turn around abruptly many case slip-up and fall-down.It is very dangerous. E. RIDE CAREFULLY ESPECIALLY IN RAIN: FRONT BRAKE LEVER REAR BRAKE LEVER ●The road surface in rain is different from which in sunshine. The braking distance becomes longer in rain.Therefore, reduce speed and brake earlier.
the vehicles behind and park motorcycle slowly. ●Return throttle grip to original close position. Apply front and rear brakes earlier and then stoplight will light to warn the vehicles behind. B.MOTORCYCLE STOPS COMPLETELY: ●Return turn signal switch to original position and turn main switch to"OFF". C.CHOOSE A PLAINPLACE: ●Choose a plain place not retarding traffic and raise up the main stand.Motorcycle is easy to fall down at a place not plain.
Ⅵ.INSPECTION BEFORE RIDING: ●Get used to check up before riding. ●For safety and preventign trouble or accident, pre-check up is necessary. ●If not so difficult or troublesome,make sure to check up before riding.If any abnormality,deliver the motorcycle to.distributor or service center for inspection and repair. NOTICE: ●Turn off engine when replenishing gasoline. NPTICE: ●If check oil volume or replace oil soon after stop, beware of burning.
B.STEERING HANDLE INSPECTION: ● ● ● ● Check steering handle up and down,forward and backward,left and right if any looseness Check if it is too tight. Check if any hitting sound If any adnornality, deliver the motorcycle to. the distridutor or servicr center for nspection and repair C.BRAKE INSPECTION: 1.Drum brake series: The free piay of brake lever or pedai should be properly adjusted.
NOTICE: sure the effect of front and rear brakes. ●Always check the free play of front and rear brake.Make adjustment with adjusting nut necessary. 2.Disk brake series: BRAKE OIL INSPECTION: REAR WHEEL BRAKE ADJUSTMENT: ●Normal fluid lever is between"UPPER"and "LOWER". ●When the fluid level is near the lower level mark,check brake pads.
F.TURN SIGNAL LIGHT INSPECTION: ●Turn main switch to "ON" ●Operate turn signal switch to make sure if turn signal lights and turn signal indicators blink. ●Check turn signal lights if any dirt or damage. E.STOPLIGHT INSPECTION: ●Turn main switch to "ON". ●Operate front and rear brakes one by one to made sure if stoplight lights. ●Check stoplight if any dirt or damage.
For 2 people front wheel :1.25kg/cm2 G.TIRE INSPECTION: For 2 people rear wheel :1.75kg/cm2 ●Check tire pressure if normal. H.SHOCK ABSORBER INSPECTION: ●Check if there is any metal trash or gravel in the grooves of tires. ●Add weight on the handle and seat,swing motorcycle up and down and check the front and rear shock absorbers if work well. ●If there is any crack or wearing exceeding the limit,replace the tire at once. I.
Ⅶ.PERIODICAL INSPECTOION: K.SPEEDOMETER INSPECTION: ●Check if speedometer works. ●For safe and comfortable riding,be sure to make periodical inspection. L.BACK MIRROR INSPECTION: ●C.P.I.motorcycle distributors and service centers provide after service,maintenance and repair for you. ●Sit on the seat to made sure the position behind and check back mirror if any dirt or damage. ●For inspection time and items,please refer to the maintenance manual.
A.OIL AND FILTER: 2.Oil change and filter cleaning: 1.Air cleaner replacement: ●When to change oil and clean filter. ●Remover left side cover. ●Change oil and clean filter at first 300km and every 1000km after. ●Remove attaching screws and air cleaner cover. NOTICE: Capacity Of Oil ●Dirt on air cleaner is the main reason to lower engine power and waste fuel. Disassembly : 1.0 Liter General Change : 0.
filter screen.Use high-pressured air to clean. *Always ride for short distance. ●Install oil filter and drain plug. *Always run with neutral gear. ●Fill with new oil 0.9 liter.Check with oil level gauge.(Do not screw in the gauge when check) *Ride at the area with cold weather. ●Tighten up oil level gauge. ●When replenish oil,do not exceed the upper level. ●After engine becomes warm,stop running for 1020seconds.Recheck oil volume. ●When change oil,if engine is still hot,beware of burning.
●Fill with new gear oil 110c.c. ●Tighten up tiller nut definitely to prevent leak out. NOTICE: ●Riding in the following conditions will make oil quality become inferior and please change it earlier. *Always ride on gravel road. DRAIN PLUG OPENING *Ride for a long distance. *Ride at the area with wet weather. 1.How to change gear oil: C.REPLENISHMENT OF BRAKE OIL: (DISK BRAKE) ●Remove drain plug to make all the oil flow out.If engine is warm,it is easier to make oil flow out.
●Replenish the specific brake oil up to the above of the mark "LOWER"then screw up the cover screws. ●Do not mix both specific and non-specific oils together,otherwise,it will cause a chemical reaction and lead to brake failure. ●Do not let the water penetrate into the main cylinder,otherwise,the boiling point will be lowered and lead to be choked. ●The painting surface and plastic parts will be corroded by the brake oil.In case of spilt, please be sure to clean promptly.
D.SPARK PLUG INSPECTION: ●Too large gap, deposit and electrode erosion will result in incomplete spark. 1.Cleaning: ●It is the best way to clean with the cleaner of spark plug. NOTICE: ●Engine is still very hot after engine stops. Beware of burning. ●Turn spark plug finger tight,then tighten with spark plug wrench. Side Electrode ●Use wire brush if no cleaner. Center Electrode 2.Adjustment: ●Normally the side electrode gap is (0.6~0.7)mm.(as shown) (0.6~0.7)mm Sealing Washer 3.
●Turn out the cap of fuse case and take out the fuse. E.BATTERY AND ELECTROLYTE INSPECTION: ●This series use M/F Battery so you do not have to inspect elcctrolyte. ●If fuse connection is not good,the fuse will overheat and breakdown. NOTICE: INSTALL: ●Absolutely do not open the lid of battery. ●Install the fuse into fuse case and fasten the cap. ●Battery may produce flammable air.Take care of fire when install or remove. ●Try to pull the fuse after instal.
easily and cause unbalance of battery load. ●If cannot find out the reason,deliver the motorcycle to.distributor or service center for inspection and repair. ●Do not use high pressured water to wash around the side cover. Ⅷ.WHEN ENGINE CAN NOT START: ●Check effective gasoline. ●Check the way of start any problem ●Check other parts if there any problem ●When your motorcycle is out of order,please send it to.service team,we are sure yor will be satisfied.
Maintenance and service Maintenance periodic form The maintenance is important to motorcycle, If drive with high speed in bad situation for a long time, must add the times of maintenance, If motorcycle have a big repaired or a accident, Must take it to check for mainly spare parts. For example: frame, indicator parts and so on. Repair or change the worn parts. Make sure safety. Notice: Don’t change motorcycle make sure it’s safety, Must use good quality spare parts if replace spare parts .
Blank 4 Cycle speedometer（x1000km） 1 Every month ﹡ Rotate the belt ﹡ Gearbox engine oil 4 8 12 6 12 18 Per1000km I （300km）R Note3 Brakes If need: R I I 28 I I I Apply the brake the light button I I I ﹡ Head light I I I ﹡ Suspension system I I I ﹡ The nuts\bolts are firm ﹡ Wheel tire ﹡ Turning bearing Note2 I I I *If you have all of tool and maintenance document, you are a mechanic person, or else must let special person maintenance and repair.
Simple trouble solution (Blank 5) Trouble phenomenon Trouble reason Spark plug no spark Solution Spark plug wear Change Ignition wire wear Change CDI wear Change Ignition switch wear Change Ignition Come off or become flexible Connect well or firm and tight Spark plug gap too small or big Adjust Spark plug pole burn Change The spark plug accumulates carbons seriously Clear out No spark to consult the spark plug THE ENGINE CAN NOT START The spark is weak No fuel Replenish Oil mouth st
Blank5 Trouble phenomenon The vehicle is unable to accelerate performance badly Trouble reason Solution The octane value of the fuel is too low Change flue Oil path stop up Clean oil path Ignition time is too early or too late Check wire and change CDI Spark too weak or flameout Check ignition and clear out Mixed air too dense or race Clean adjust carburetor Engine leak Check and clear out Muffler stop up Dredge Belt wear Change The automatic clutch roller wearing Change Consult engin
SPECIFICATION OF WY50QT-4 ITEM SPECIFICATION ITEM SPECIFICATION L*W*H: 1720*625*1035mm Front Tire: 3.00-10(100/60-12) Wheel Base: 1200mm Rear Tire: 3.00-10(100/60-12) Ground Clearance: 100mm Air pressure of Front Tire: 200 Dry Mass: 90kg Air pressure of Rear Tire: 250 Max Load: 75 kg Transmission: C.V.T Handle bar return angle ≤48° Transmission Ratio: 9.39~26.
Ⅸ.Emission Control System Warranty Statement Wangye USA Co., LLC is pleased to explain the emission control system warranty on Highway Motorcycle. New Highway Motorcycle must be designed, built and equipped to regulations and standards of the United States Environmental Protection Agency and the California Air Resource Board and free from defects in material and workmanship that may keep it from these requirements in the all applicable regulations. Wangye USA Co.
(iv). (v). (vi). (vii). (viii). or use of the motorcycle after discovery of a defect; Appearance-related damages of body parts.
