User manual

27
Ⅵ.Vehicle identification
Vehicle type, Code and trademark of the bikes（Fig27）
When the bikes are registered or getting the license from the transport department, the
owner should be send the VIN number and engine number。The maintain people
change the parts, need the numbers too.
The products brand should be added at the right side plate of the Main stand（see P3）.
Ⅶ.Tool set
Tool bag(Fig 28)in the boot of seat, Using for the urgent accident
when driving, it including the something of the following：
8×10mm spanner 12×14mm spanner
Screw drive Hexagon spanner
Wrench bar 18.5×17mm wrench spanner
Fig27
4 1
Fig28
28
Ⅷ.Main technique parameter
Table 5
Item Data Item Data
L×W×H mm 2050×680×1209
Front tyre
120/70-12
Wheelbase mm 1440 Rear tyre
120/70-12
Ground Clearance mm 90 Air Pressure, Fr tyre 150 kPa
Dry weight kg 105 Air Pressure, Rr tyre 200 kPa
Max Load kg 75
Transmission system
CVT
Brake Distance mm
≤4(30km/h)
Gear ratio
10.83-33.85
Turning angle of steering
handle
≤48°
Engine Type
1PE40QMB, Air-cooled, 2 stroke,
Single Cylinder
Max Speed km/h
≤55km/h Bore×stroke mm 40.0×39.2
Consumption L/100km
≤2.0L/100km
Displacement
49.3 ml
Climb ability º ≥4.5
Clutch Automatically centrifugal
Light vertical angle -1.3% Fuel tank L 7.5
Starting system Electric &Kick Battery 12V 7Ah
Lubricative system
Separate lubricative Fuse 15 A
Rated power
3.0kW/7000（r/min）
Headlight
12V18W/18W×2
Maximum torque
3.9N.m/6500（r/min）
Taillight/stop light 12V P21/5W
Compression ration
7 1∶ License light 12V 5W
Spark Plug Model
BPR7HS BP7HS（NGK）、
E7TC or E7RTC
Direction light
12V 10W×4