User`s manual

- 11 -
The free path of rear brake handle（Fig14、Fig16）
Measure the free path of rear brake handle before the detent function. The free path should be within
（10～20）mm from the end of brake handle to calculate.
• Adjust nut：（ A ） Increase the free path.
（B）Decrease the free path.
After adjust, the axle pin (2) should touch closely with nut (1) groove after adjust.
Fig14
Fig15
1
2
- 12 -
Abrasion mark of the brake（Fig16）
（1） Reference marks
（2） Indicate marks.
If totally brake. Change the brake block when reference marks and indicate marks must be situated a
straight line.
Noted：Once the brake needs to replace for a new one, please
go for the nearest maintenance service where there are technicians trained by formal training to
check. Spare parts of our company only can be used for replacement.
1