User`s manual

- 25 -
oil replacement、Machine oil oil filler strainer's clean
Change the oil（fig25）
When replaces the machine oil, should when engine's temperature not yet cools, the automobile
body carries on by the jiffy stand support reliable condition, guaranteed that fast and complete puts
the machine oil clean 。
• Machine oil oil filler strainer's clean
• Preoccupies gets off an aircraft the oil dipstick and located at
the engine base oil filter cover 1, after taking down the oil filter
cover, then takes down the oil filter mesh 2 and spring 3 。
• Washes with the resolver the mesh clean 。
• Installs the mesh, the spring and oil filter cover 。
• Pours into to the engine conforms to the specification machine
oil, the oil mass take the bayonet gage upper limit symbol as the
standard. When survey oil mass level, cannot turn on lathe into
the bayonet gage
• Tighten the oil-foot。
• Starting engine, lets the engine transport the rotation minute
first under the idling regime condition, then, then switches off
Fig24
- 26 -
the engine。
• The measuring engine oil mass, the oil mass level certainly
must again approach or achieve the upper limit symbol position,
simultaneously does not allow to have the oil leak
phenomenon。