User`s manual

- 6 -
Instrument and turn signal light (Fig3)
（1）Left turning signal light
⑵Odometer
⑶ Fuel meter
⑷ Speedometer
⑸ Right turning signal light
⑹ High-beam indicator
Ignition switch（Fig4）
⑴On ( )-when the switch turn to this position,
Start engine and do not pull out the key.
⑵Off ( ) When the switch turn to this position,
Start engine power off and take out the key.
⑶Lock ( ) When the switch turn to lock position( ),
Take out the key .do not do any turning operation
And do not start engine and light.
Notice :If the engine is idling speed for a long time in the hot
climate, It will appear too hot phenomenon Must close engine.
1
9
1
FIG.3
Fig. 4
- 7 -
FUELMETER (Fig 5)
Fuel meter (5) show the approx remainder of flue. When the hand
point to (F), it indicates Full tank of 4L.
When the hand at red section it indicates the remainder of flue is 1.2L.
Headlight switch (1). （Fig.6）
There are 3 choices for Headlight Switch: “ ” 、“ ” and“•”
:Headlight, sidelights, taillight and meter light turn on。
：Sidelights, taillight and meter light lighting.
•：Headlight, sidelights, taillight and meter light turn off。
Start button（2）（ Fig 6）
Press this button to start engine.（Ref:P14）
The front Hi-Low switch (1) (Fig 7):
Press ( ) button is high beam; press ( ) button is low
beam.
Turn signal light switch (2)(Fig 7):
When the switches on ( ) turn left. When the switch on ( )
turn right, press this button to put out the signal light.。
Fig.5
Fig.7
Fig.6