Operating Instructions and Installation Instructions

22

INSTALLATION INSTRUCTIONS
Before installation and/or use of this appliance please read these instructions carefully to ensure that
all requirements are fully understood.
The appliance must be fitted by a registered installer, or approved by your local building control officer.
It is very important to understand the requirements of the national Building Regulations and standards,
along with any local regulations and working practices that may apply. Should any conflict occur
between these instructions and these regulations then the regulations must apply.
Your local Building Control Office can advise regarding the requirements of the regulations.
The appliance must be fitted by a registered installer or approved by your local building control officer.
Asbestos: This appliance contains no asbestos. If there is the possibility of disturbing any asbestos in
thecourseof installation seek specialist guidance and use appropriate equipment.
Metal Parts: Take care when installing or servicing the stove to avoid personal injury.
Each installation is unique to the property so it is not possible to give details to suit every setting. The
installation must comply with Building Regulations and be made using "best practice" construction
methods.
All local regulations, including those referring to national and European Standards need to be
complied with when installing the appliance.
1: Take care when installing the appliance
careless handling can damage the finish.
2: Remove the 6 screws holding the flue
collar
3: Remove disc and flue collar
Tools required 10mm A/F spanner /socket
wrench