Operating Instructions and Installation Instructions

10

You can close the grate by using the tool that is supplied with the stove
Close the Primary air control and use the Air wash to control the burn rate when appliance is at
operating temperature,
Wood burns best on a bed of ash.
Burn new logs at high output for a few minutes before adjusting the Air wash control. Refuel little and
often for clean, burning.
When in use, burning the appliance at high output for a short period also reduces tars and soot.
If a chimney fire occurs:
Shut all air controls immediately.
Evacuate the building.
Call the fire brigade.
Do not re-enter the building until it is confirmed safe.
Do not use the appliance after a chimney fire until:
It has been inspected by a registered installer, confirming the appliance is safe to use.