Operating Instructions and Installation Instructions

18
Your Kanda stove at a single glance
The Kanda
The Kanda is a combination of comfort and ecient heat emission. The large glass panes allow emission of
the heat from the stove directly to the environment to make your room instantly comfortable. The built-in ue
gas deector ensures circulation of ue gases in the interior parts. Combined with the extra after-burning, it
means that the ue gases have better combustion and reduce the burden on the environment.
The Kanda is equipped with 2 connections for the convection system. The supply of combustion air can be
adjusted by handling the air grate.
The ash pan must be cleaned regularly to prevent damage.
Installation
It is common practice for the dealer where you purchased your Kanda stove to also take care of installing it.
If this is not the case, please ensure that the installation is done by a certied installer. A certied installer
can also give you the right advice about the ue tube to which the stove must be connected. Connecting
wood-burning stoves by unqualied persons is prohibited, in which case we cannot give any guarantee
about proper functioning of your Kanda stove. Please bear the re safety in mind when installing the stove.
See also page 24.
The wood-burning stove is suitable as an extra heat source and does not replace your principal
heating device.
Usage early in autumn or late in winter
When the external and internal temperatures do not dier much, a proper chimney draught is a real
challenge. You can help chimney draught get started by burning some wood while keeping all air
inlets maximally open. An abundant air supply speeds up quick heating which in turn increases the
draught in the chimney. Lighting up the stove with only a little wood prevents smoke from streaming
into the room.
!
!
!