Operation Manual

19
GB
3.0 INSTRUCTIONS FOR THE USER
Theoperatingswitchesofthereplaceareplacedinthemiddleoftheappliancebehindthevalve.
3.1 Operating the replace for the rst time
Openthegastap,whichismountedinthegaspipeleadingtothereplace.
Turn ignition button  to the left in the direction of ignition up to the end stop; then press it and wait for
a few seconds. You will hear a click when pressing the button and turning it further to the left.
Youcanseethroughtheglasswindowontheleftsideofthestoveifthepilotamehaslit.Repeatthese
actions if the pilot has not lit.
Oncethepilotameisburning,keeptheignitionbuttonpressedforatleast30seconds,thenrelease
thepressure,andthepilotameshouldstillbeburning.Nowturnbutton further to the left to put the
amehigher.
Now the continuously variable  knob can be set at the desired setting between high and low with the
remote control.
You will learn which setting is most suitable for your room.
Operating the remote control is simple: knob ()tolettheameburnhigher,andknob() to let the
ameburnlowerorlettheameextinguish.
3.2 Turning off the main burner
You can turn off the main burner by keeping knob () of the remote control pressed until the LED light
starts blinking on the receiver. You can also shut off the burner by turning the ignition knob A clockwise
until the end stop.
3.3 Turning off the pilot ame
Youcanturnoffthepilotamebypressingtheignitionknoblightlyandturnitfurthertotheright.
3.4 Instructions for the user
Donotplaceanycombustibleobjectsunderneathorinfrontofthegasre.•
 